banner
For Agents
36 min read

The Essential Auckland Property Due Diligence Checklist: A Developer's Step-by-Step Guide

We recently had Campbell Brown Planning on our Relab podcast to share their systematic approach to site assessment.

Director Michael Campbell has seen development from both sides. He spent years in senior council management dealing with consents. Now at Campbell Brown Planning, he helps developers navigate the same system.

Campbell Brown Planning's first principle? "Good base information is key."
Makes sense, right? But here's where it gets practical. Their process centers on asking three questions for every detail you find:

  • Is it a fatal flaw?
  • Is it actually an advantage?
  • Or is there a solution to work around it?

Every site's different. That's why Michael keeps coming back to having "a process that makes sure you go through a checklist of available information."

The goal is simple: Know exactly what you can and can't do before you buy.

So What's Next?

We're going to walk through the steps for checking out any Auckland development site. Not just what to look for, but why it matters and what to do if something comes up.

We'll point you to the free resources that are already out there, plus show you where our property data platform can save you time. And if you need proper planning advice? That's when you call in experts like Campbell Brown Planning.

Here's the checklist...

Your Due Diligence Checklist


Here's your checklist for your next site assessment:

  1. Auckland Unitary Plan - Your foundation (zoning, overlays, and constraints like Significant Ecological Areas)
  2. Natural Hazards - Flooding and overland flow paths
  3. Infrastructure - Confirming actual capacity and connections
  4. Property Documentation - LIMs, property files, titles, and historic aerials
  5. Physical Site Constraints - Power lines, protected trees, streams, and access
  6. Context Analysis - Neighbouring developments and market demand
  7. Financial Considerations - Development contributions (~$50k per unit)
  8. Plan Change Uncertainty - Current vs proposed planning rules
  9. Specialist Investigations - Contamination, geotechnical, archaeological, and heritage
  10. Each step builds on the last. Work through them systematically before making your purchase decision.

Step 1: Start With the Auckland Unitary Plan (Your Foundation)


Campbell Brown Planning's starting point is clear: "The first thing, the most important thing we like to do is work out what is the zoning of the site."

Why? Because zoning determines the core rules for your property. Everything from activities, height limits to setbacks flows from this foundation.

But here's the key—successful development requires looking beyond just the zoning to understand what's really possible on your site.

What You Need to Check:

Zoning (Auckland Unitary Plan)

  • Your base zoning sets your core development rights
  • Rules for height, coverage, setbacks all stem from here

Overlays / Control and Precincts

  • Some add development potential (like additional height overlays)
  • Others impose restrictions that could limit your development plans

Controls and Designations

  • Road widening designations may reduce your developable land area
  • Infrastructure designations may create no-build zones

Critical Red Flags to Investigate:

Significant Ecological Areas (SEAs) Environmental protections can override residential zoning. As Michael explains: "You might find a site that's zoned residential, but it may have a significant ecological area over part or all of it." That creates major development limits you need to know about upfront.

Heritage Overlays Don't just check the Unitary Plan. Some Heritage New Zealand sites aren't included but are still protected (check here or archaeological sites). Always cross-check their database for archaeological sites too.

Designations Road widening is the common one. Can you live with losing that frontage if you factor it into the purchase price? Or does it kill your feasibility?
The planning experts at Campbell Brown put it simply: If a designation means "you can't achieve the type of development that you want," that should weigh heavily in your purchase decision.
The bottom line: Can you work within these constraints and achieve an acceptable outcome for the project, or will they kill your project's feasibility?

Step 2: Natural Hazards


Auckland Council GeoMaps is your next critical stop. Campbell Brown Planning calls it "a vital resource" for uncovering hidden site constraints.

Check for Flooding and Overland Flow Paths First


Why? Because post-Anniversary floods, Council is "very cautious about areas of floodplains."

And they're not just worried about your building. As the developer, you need to demonstrate:

  • Your development won't harm the health and safety of future occupants
  • You won't impact upstream and downstream neighbours

How to Mitigate Flood Plain Constraints:

When developing in a flood plain, Council will expect you to address the risks. Here are some potential key mitigation measures:

  • Higher finished floor levels
  • Clear evacuation routes for occupants
  • Building designs that maintain flood storage capacity
  • Strategic placement of buildings and earthworks to minimise flow disruption

Each site is different and location within the catchment is crucial.

"If the site's sitting at the top of the catchment and the floodplain is relatively small and discrete, it may not be an issue," Michael notes.

But at the bottom of a catchment? "That suddenly could mean that it's potentially fatal to your aspirations for the site."

Your Next Step: If you discover any floodplain on your site, get professional advice from an engineer. They'll determine whether it's a minor constraint you can work around—or a major issue that reshapes your entire project.

Step 3: Infrastructure


Just Because You See Pipes Doesn't Mean You Can Use Them


Here's what catches developers off guard: You see water pipes in the street. Stormwater drains. Wastewater connections. Job done, right?

Wrong.

Campbell Brown Planning's seen this mistake too many times. "It's important not to assume just because you're in an urban area that you will have access to infrastructure."

Even when infrastructure is visible, you're not home free.

"Just because a site has access and you can see servicing... that doesn't necessarily mean that you can access the line. There may be capacity issues… That could delay you for months or years." Michael warns.

Your Action Steps:

  • Check Auckland GIS for water supply, wastewater and stormwater locations
  • Verify actual capacity with Watercare—don't just look for pipes.
  • Check with an engineer!

Using Historic Aerials (Your Time Machine)


The GIS system lets you view aerial photos back to 1956. Why should you care?

One word: contamination.

"If there were orchards on the site then probably chances are you're going to need a contamination report." This is especially critical in areas like West Auckland and Whenuapai.

Step 4: Property Documentation (What Council Knows That You Need to Know)


Time to dig into the paperwork.

As Campbell Brown Planning warns: "What you may perceive as what is lawful on the site... and what the Council perceives as happening can be different."

This can show if there are an illegal work undertaken on the site

Land Information Memorandum (LIM) - Your First Stop


Key rule: No LIM older than three months.

Before you order one, ask the vendor if they have a recent LIM. This might save you having to purchase one yourself.

The LIM reveals the information Council has on the property:

  • Lawful building consents and resource consents
  • Enforcement actions
  • Proposed designations
  • Notices of requirement

Order a LIM here

Property File - The Deep Dive


Cost: About $100 Timeline: 10 days standard, 3 days urgent

Order a property file here

This is where you uncover the site's full history:

  • Old geotech reports and floor plans (saves you money)
  • Previous consents
  • Building history
  • Planning permissions

Michael's seen this scenario play out: "Sometimes what you may perceive as being lawful and has been operating for say 10 years and what the Council perceives as happening can be different."

Translation? That commercial use you're buying? Might not be lawfully established, so its really important to check the use that is operating against the Council records.

You will also see if there are an conditions that might have been attached to a consent that places an ongoing obligation of the operation, like restrictions on the hours of operation.

And if it's not? Once you own it, it's your problem to fix – regardless of any civil redress you might have against the seller.

Certificate of Title - Not Just a Boundary Check



Get your Record of Title here

"Don't necessarily assume that fences demark the actual curtilage of a property" Michael advises. The Certificate of Title helps ensure you're buying what you think you're getting.

Check the layout and dimensions on the title - and if you spot survey pegs during the site visit even better.

But boundaries are just one element. It's also important to check all interests on the title.

You can order this through Relab or get this from LINZ.

Common restrictions that can catch developers out:

  • Private covenants blocking relocated buildings (common in new subdivisions)
  • Height protection controls
  • Geotechnical requirements from the original subdivision
  • Additional setback requirements beyond council rules
  • Restrictions on the number of units allowed

The bottom line: Make sure you're buying what you think you're getting.

Your lawyer can help interpret these, but understanding them yourself means you can scan potential sites quicker.

Step 5: Physical Site Constraints (From Power Lines to Protected Trees)


These are the constraints you can often see—but their impact might surprise you.

5a. Power Lines: More Than Just an Eyesore


Check the Transpower transmission lines map before you buy.

Why? Setback requirements depend on voltage, and they affect:

  • Where you can build
  • Construction methods and scaffolding requirements
  • Your development's viability

Campbell Brown Planning has seen it first-hand: "It can mean you have to set back your development and in some cases, this could be the difference between a development that's viable or not viable."

Power lines across the front of your property? That setback could impact your yield.

5b. Street Trees: The Immovable Objects

Here's what developers often don't realise: Parks Department owns street trees, and they're "very strict about removal."

"What you may think is a relatively innocuous tree, the Parks Department may not agree with you," Michael warns.

The worst part? "If Parks own the tree, then like any other landowner, if they say no, you can't remove the tree, you don't have any appeal rights generally."

Translation: That perfect vehicle access you planned? One street tree could block it entirely. As Michael puts it, "it can be fatal to a development."

Before you assume you can remove a tree:

  • Engage an arborist early
  • Get their assessment in writing
  • Have a Plan B for access

Ecological Constraints


Got a stream on your dream site? Better check its width. Near the coast? Same rules apply.

Michael explains: "If you've got a stream wider than three metres, there are esplanade reserve requirements... basically a requirement that you need to vest 20 metres from either edge of the stream, coastal marine zone or coastal edge."

This land vests to Council "without compensation."

Do the math: A 3-meter-wide stream means losing 43 meters of developable width (20m each side plus the stream). For free.

And natural wetlands? They're currently a complete no-go. Destroying them is a "prohibited activity"—no resource consent can be sought

Access Constraints: Look Beyond Your Driveway


Look beyond your boundary for things that could make access tricky:

  • Bus stops (very diffident and expensive to move them)
  • No parking zones
  • Intersection proximity

Campbell Brown Planning's advice is crucial here: "It's about understanding the context of the site because those things could even be outside the resource consent team's control."

You might get resource consent for your building, but if Transpower says you're too close to their lines? "They've got their own legislation that can prevent you from doing it."

Step 6: Context Analysis (What's Happening Next Door Matters)

Your site doesn't exist in a vacuum. What's happening around it can make or break your development.

Check Your Neighbours' Zoning



Michael shares a scenario that's caught developers off guard: "You've bought a piece of land that's zoned for a lower density and you think great, I'm buying into a nice area, but you didn't realise there was a high density zone along your western boundary that enables 5 storeys."

That might put future buyers off your site.

Imagine marketing your boutique townhouses while a 5-storey apartment block rises next door.

What to investigate:

  • Zoning on all boundaries
  • Height limits for adjacent sites
  • Commercial or industrial zones nearby
  • Future development potential of neighbouring properties
  • Existing approved consents

Find Out What's Already Lodged Next Door


Once a resource consent is lodged with Council, it's public information.
You can:

  • Contact Council directly about neighbouring consents
  • Request copies (may include copying charges)
  • Use Relab to view an overview of consents lodged in Auckland
  • Use the Local Government Official Information Act if needed

Campbell Brown Planning suggests going deeper: "If you've got an indication that someone's building next door... obtain a copy of the property file."

Why? Understanding your neighbour's plans helps you:

  • Design around their development
  • Adjust your feasibility calculations
  • Decide if the site still works for your vision

"If you've bought a site... you would like a nice backyard and you find out there's 10 units running along your western boundary, that may affect whether or not you're prepared to purchase the site."

Market Insights: What's Actually Selling?


Before designing anything, understand your local market.

Michael's practical advice: "Have a look in your area, have a look at what's being built... if people are building 2-bedroom apartments, maybe that's what's selling."

Your research checklist:

  • Walk the neighbourhood
  • Note what's under construction
  • Talk to local agents about buyer demand
  • Check if families want 3-4 bedrooms or singles prefer studios
  • Run your own comparable sales analysis using Relab

"Understanding your local demographic... what's selling? I think that's really helpful," Michael emphasises.

Remember, we're in a market with "probably a surplus of housing." Your development needs to meet real demand.

Step 7: Financial Reality Check (The True Cost of Development)



Let's talk numbers. Real numbers that affect your bottom line.

Development Contributions:



"Development contributions per unit are not insignificant," Campbell Brown Planning warns. These are levied on new development to fund infrastructure and growth costs—roads, stormwater, community facilities, and parks.

Current reality:

  • Average: approximately $20,000 per unit
  • Some areas up to: $72,000 per unit
  • Specific suburbs seeing significant jumps to average $48,000 per unit: Mount Roskill, Mangere, Inner Northwest, Tamaki, Drury

Use the Development Contributions Estimator to check current rates. But here's the catch—Council is reviewing these right now. Michael warns the estimator shows existing policy, not the proposed increases.

How it typically works:

  • You pay for each new dwelling added
  • Get credit for existing dwellings
  • Slightly reduced for higher density terraces and apartments vs standalone houses

Example: Buy a site with one house, build four units = pay development contributions on three units.

Infrastructure Growth Charges: The Other Bill


Don't forget Watercare's infrastructure growth charge. This is levied for the wastewater component of infrastructure.

Michael's estimate: "around $18,000 plus GST"

Your total per new dwelling

  • Development contribution: ~$30,000
  • Infrastructure growth charge: ~$18,000 + GST
  • Total: Around the $50,000 for each new dwelling

Development fees vary by area. Some areas have completed growth infrastructure that's paid for, where others areas need significant new work and may be more

Step 8: Plan Change Uncertainty


Auckland's planning rules are shifting. Some changes could boost development potential, others could restrict it.

Plan Change 78 aims to enable greater intensification around centres and transport corridors through medium density standards. But it's currently in a "holding pattern." And the government has recently signalled that the

Auckland Council can withdraw it.

Michael's warning about banking on rezoning: "Buying on the hope that it gets rezoned... that would be, in the current environment, a risky proposition."Don't factor potential upzoning into your feasibility. Work with what's zoned today.

Plan Change 79 introduces new transport provisions—pedestrian access, cycling, lighting, and parking requirements. This could significantly impact your site layout and yield.

If you are looking at a rectangle site you still need space for;

  • vehicle access
  • pedestrian access
  • Outlook for your amenity
  • Outdoor living area
  • Building

With extra space required for pedestrian access it now might be a bit tight. As Campbell Brown Planning notes: "With an 18 m wide site you might make it work, but with a 16m wide site it might be problematic."

Step 9: Specialist Investigations (When to Call in the Experts)


Some issues need expert eyes. Here's when to bring in specialists—before you buy.

Contamination: The Orchard Legacy


Historical land use matters. A lot.

Michael's specific warning: "A case in point is... West Auckland and Whenuapai because a lot of Whenuapai was formerly orchard."

How to check:

  • Use GIS historic aerials (available back to 1956)
  • Look for past orchards, industrial use, petrol stations, mechanics
  • If you find any? "Chances are you're going to need a contamination report"

The contaminated land information page has more details.

Geotechnical: When Steep Means Expensive


Got a steep site? You may need specific engineering design.

Watch for:

  • Steep topography requiring stability assessment
  • Areas with stability overlays (like Meadowbank coastal areas)
  • Any site where Council requires geotech reports

"Most developments are going to need a geotechnical report anyway," Campbell Brown Planning notes. But steep sites need extra attention – and budget.

Archaeological and Heritage: The 100-Year Rule


This catches people off guard. Michael explains: "Any site... that has had human occupation for more than 100 years is potentially a site that could be a flag for heritage."

What to look for:

• Coastal sites (check for middens—shell deposits indicating habitation)
• Sites with long occupation history
• Areas of cultural significance

Check both:

Campbell Brown Planning warns: "There are sites that are protected by
Heritage New Zealand that are not included in the unitary plan."

When to Assemble Your Team


Campbell Brown Planning's approach is clear: "As planners, we're well placed to advise clients on these things. We know where to look."

Once you understand what overlays apply to your site, it's about analysing what they mean for your development potential.

Start with a planner who can:

  • Interpret planning provisions
  • Identify when you need specialists
  • Guide your due diligence process

Add specialists for:

  • Engineer: Larger projects, flooding issues, servicing questions
  • Architect: Bulk and location studies
  • Traffic Engineer Plan Change 79 compliance
  • Arborist: Any street tree concerns
  • Ecologist: Potential wetlands or SEAs
  • Contamination expert: Historical commercial/orchard use

Michael's final word on skipping due diligence: "There's nothing worse than buying a piece of land and... you're not able to do what you purchased it for."

The upfront cost of experts? Far less than owning undevelopable land.

Your Next Steps


Ready to start your due diligence?


  • Access the free resources linked throughout this guide
  • Try Relab's property data platform for faster research
  • Contact Campbell Brown Planning for expert guidance on more complex sites

Share post

Stay up to date

withRelab°

by signing up

to our newsletter.