
PC120 Hub – Housing Intensification & Resilience in Auckland
PC120 (also called the Auckland Housing Planning Instrument – AHPI) is a proposed plan change to the Auckland Unitary Plan. It replaces much of Plan Change 78 (PC78) and the blanket Medium Density Residential Standards (MDRS) with a more targeted approach.
The plan change has two main goals: maintain overall housing capacity at around 2 million dwellings, and better manage natural hazard risks, especially flooding, and align growth with infrastructure.
Key stat: Capacity modelling shows 2,069,708 plan-enabled dwellings under PC120 vs 2,073,946 under PC78 – a difference of 4,238 dwellings (0.2%), which Council treats as negligible.
Understanding PC120
1. PC120 – evolving plan change
- Replaces parts of PC78 + MDRS with a new "Auckland Housing Planning Instrument (AHPI)" framework.
- Focuses growth up and around centres, rapid transit and corridors, not blanket suburban intensification.
- Introduces stronger natural hazard risk management and new / updated qualifying matters (QMs).
- Most zoning and height changes are still proposed and subject to submissions and hearings.
View official PC120 information on Auckland Council →
2. New flood hazard rules – operative, visible in Relab
- Natural hazards chapter E36 and related flood rules have immediate legal effect from 3 November.
- New framework distinguishes significant / potentially tolerable / acceptable risk and aims to avoid significant risk and only enable development where risk is tolerable or acceptable.
- Relab now surfaces these via a new flood hazard layer, so users can quickly see flood / overland flow risk at property level.
Where to start
What is Plan Change 120 →
Full explainer of PC120, its purpose, and key themes
PC120 Timeline & Status →
Track where PC120 is at in the Council process
PC120 Tools & Resources →
How to check flood hazards in Relab and access Council's official tools
Frequently asked questions
What's the difference between flood hazard and flood risk?
Flood hazard is what Relab shows – the flood characteristics at a location based on Council modeling (depth, velocity, frequency of flooding). Hazard levels are: Very High, High, Medium, or Low.
Flood risk is what Council determines – it combines the hazard level with what you want to build. For example:
- A carpark on a High Hazard site might be Potentially Tolerable risk
- A residential dwelling on the same High Hazard site might be Significant risk
The same property can have different risk outcomes depending on the proposed activity. Relab cannot tell you the risk outcome – that requires a formal assessment by Council, your planner, and/or a Chartered Professional Engineer.
How does Relab's data relate to official PC120 maps and information?
What we show:
- Flood hazard levels (Very High/High/Medium/Low) from operative PC120 natural hazard provisions (E36)
- Standard zoning and overlays from the operative Auckland Unitary Plan, not draft PC120 zoning rules
What we don't show:
- Risk outcomes (significant/tolerable/acceptable) – these depend on your proposed activity and require Council/professional assessment
- Draft PC120 zoning and height controls (MHS/MHU/THAB) at parcel level
- Council's full set of Qualifying Matters and infrastructure constraints
How to cross-check with Council:
- Use Relab for quick hazard screening and baseline property data
- Use Auckland Council's PC120 Map Viewer for official PC120 spatial information
- Use Flood Viewer for detailed flood modeling and official determinations
- Use GeoMaps for broader planning and hazard information
- Get a LIM for comprehensive property information
- Obtain advice from resource consent planners and Chartered Professional Engineers for specific development proposals
Is PC120 law yet?
No. Most PC120 provisions (zoning, height, QMs) are still proposed and going through submissions, hearings and decisions. The natural hazard rules (E36) have immediate legal effect.
Does PC120 reduce development capacity in Auckland?
Modelling shows PC120 still enables around 2,069,708 dwellings vs 2,073,946 under PC78 – a 0.2% difference. Council expects further modelling to confirm there is no meaningful deficit.
Where can I see how PC120 affects a specific property?
Use Auckland Council's PC120 map viewer and property summary tool for official PC120 spatial information, then use Relab's layers (including flood hazard) as a complementary view.
Does Relab show all PC120 zoning changes?
No. Relab only surfaces operative information (e.g. flood hazard layer). Draft zoning changes remain on Council's systems until they become operative.
Is this advice I can rely on for consents or legal decisions?
No. Relab is a screening tool that shows indicative flood hazard based on Council data. All content is for general awareness only, not planning, engineering, legal, or insurance advice.
For specific development projects or property decisions:
- Check Auckland Council's official tools (Flood Viewer, PC120 Map Viewer, GeoMaps)
- Obtain a Land Information Memorandum (LIM)
Get professional advice from:
- Resource consent planners for activity status and consent requirements
- Chartered Professional Engineers (CPEng) for flood risk assessments
- Lawyers for complex property or consent matters
- Insurers for coverage implications